Brief Introduction to Wet Wire Drawing Machine
Brief Introduction to Wet Wire Drawing Machine
详情
Compared with other similar equipment, the distinctive feature of the wet wire drawing machine is that there is a certain degree of relative sliding between the steel wire and the reels during the drawing process. During operation, the steel wire, reels, drawing dies and other components are either immersed in or sprayed with cooling lubricant.
Also known as the slip-type multi-pass wire drawing machine, the wet wire drawing machine features back-pull drawing. It boasts a simple and compact structure, small footprint, easy operation, high drawing speed, excellent cooling performance, long die service life, eco-friendly and dust-free operation, as well as finished steel wire with clean surface and no torsion.
(2) Before drawing, check whether the incoming material meets the specified requirements and qualified quality, and verify whether the die matching is appropriate.
(3) Open the water valve to fill the water tank with soap solution, then close the inlet valve.
(4) Before starting the spool take-up machine, check whether the air pressure is normal. Only when the air pressure is normal can the spool be installed.
(5) If any abnormality is detected during the operation of the wet wire drawing machine, stop the machine immediately for inspection and troubleshooting.
Also known as the slip-type multi-pass wire drawing machine, the wet wire drawing machine features back-pull drawing. It boasts a simple and compact structure, small footprint, easy operation, high drawing speed, excellent cooling performance, long die service life, eco-friendly and dust-free operation, as well as finished steel wire with clean surface and no torsion.
Operating Rules for Wet Wire Drawing Machine:
(1) Before starting the machine, check the air pressure and oil level of the equipment, as well as the fastening and lubrication of the spool take-up machine. Also inspect whether the safety protection devices are intact and functional.(2) Before drawing, check whether the incoming material meets the specified requirements and qualified quality, and verify whether the die matching is appropriate.
(3) Open the water valve to fill the water tank with soap solution, then close the inlet valve.
(4) Before starting the spool take-up machine, check whether the air pressure is normal. Only when the air pressure is normal can the spool be installed.
(5) If any abnormality is detected during the operation of the wet wire drawing machine, stop the machine immediately for inspection and troubleshooting.
扫二维码用手机看
Previous
:
Sorry, no more
上一个
:
很抱歉没有了
Contact Us
Company Address：Building 10, No. 16 Ruijiang Road, Xinqiao Town, Jingjiang City, Jiangsu Province, China
Contact Person：Mr. Bao
Service Hotline：+86 13337191955
Contact Phone：+86 13861639518
Email：zt@zhaotongkj.com
Website：https://en.zhaotongkj.com/
Powered by Jingjiang Zhaotong Technology Co., Ltd. © 2021-2025 Inc.
